700 Series Pistons

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9bar).

"Easy Flow" Pistons (blue) are recommended for most general applications and they ensure no material residue is left on the syringe barrel walls while dispensing.  Wiper Pistons (white) are a tighter fit for use with very low viscosity fluid or with mechanical devices such as the TS700 manual syringe gun to prevent leakage past the double wiping edges.  Straight Wall Pistons (red) are recommended for reduced stringing and "bouncing" with high viscosity products.

Easy Flow - Blue

• 700 Series Easy Flow Piston, Blue, easy flow, molded in polyethylene material. Packaged in box of 50 pieces.

Wiper Piston - White

• 700 Series Wiper Piston, White, wiper white, molded in polyethylene material. Packaged in box of 50 pieces.

Straight Wall - Red

• 700 Series Straight Wall Piston, Red, straight wall red, molded in polyethylene material. Packaged in box of 50 pieces.

3cc Pistons

• Overall Length = 0.30” (7.62mm)

• Diameter = 0.367” (9.32mm)

5cc Pistons

• Overall Length = 0.38” (9.65mm)

• Diameter = 0.50” (12.70mm)

5cc Pistons

• Overall Length = 0.38” (9.65mm)

• Diameter = 0.50” (12.70mm)

10cc Pistons

• Overall Length = 0.47” (11.94mm)

• Diameter = 0.62” (15.75mm)

30/55cc Pistons

• Overall Length = 0.67” (17.01mm)

• Diameter = 0.89” (22.60mm)